Every roll of construction film we ship is made to order. Thickness from 30 to 200 mic, widths up to 8 metres, three job-specific colours, optional reinforcement and printing — specified by you, extruded by us. This page lists the line the way a buyer needs to see it: what the range covers and what we need from you to quote.
Construction film is not one product — it is a family sized by the work it does. Light covers for dust protection sit at the low end of the range; vapour barriers under slabs and heavy curing covers sit at the high end. Because everything is produced to order, you do not buy “close enough”: the thickness you specify is the thickness we extrude, within a stated tolerance.
| Typical job | Where it sits in the range | Why |
|---|---|---|
| Dust sheets and equipment covers | Lower end | Light, large and disposable — coverage matters more than strength |
| General site protection and wrapping | Middle | Balance of tear resistance and cost per square metre |
| Vapour barriers and curing covers | Upper end | Continuity and puncture resistance carry the job |
Width is where construction film quietly wins or loses money. Wide single-piece film means fewer overlaps on the ground, less taping, less labour, and fewer points where water or dust gets through. We produce widths up to 8 m in a single piece, cut to the dimension that fits your slab, pit or structure — including the anchoring allowance you plan for.
Ordering tip: send us the covered dimension plus your overlap or anchoring allowance. We quote the exact width to order — offcut waste is a cost you should never pay for on a made-to-order product. For retail programmes, rolls can also be wound folded-to-1-metre, so a 2 m or 4 m sheet opens to full width right on the shelf.
Visibility is the job: curing covers where crews must see the concrete, vapour checks, and any cover where inspection matters more than light control.
Light-blocking and heat-absorbing: ground covers, barriers and any application where the content under the film should stay unseen and cool.
The site-identification colour: quick to recognise, easy to allocate to one crew or one zone, and the standard choice for many contractors’ general protection work.
If your project needs a colour outside the standard three, that is a specification question, not an obstacle — custom colours are part of the made-to-order service.
For European and American buyers, procurement increasingly weights environmental impact — and construction film is available in a recycled-material version alongside the virgin range. Two practical differences matter when specifying. First, colour: recycled resin has its own natural tone, so recycled film typically comes in a grey or greyish-white shade rather than the clear, black and blue of the virgin line — output in pure white is limited. Second, thickness: recycled film is usually specified at heavier gauges than virgin film for the same covering job. On a recent order for a buyer in Israel, the virgin rolls ran at 100 mic while the recycled rolls were specified at 200 and 300 mic — the heavier gauge is what lets the recyclate carry the same heavy-duty work. Width, gauge and MOQ (1,000 kg per specification) are confirmed per order, and for tenders or projects where reducing virgin polymer use is part of the buying decision, the recycled option is worth pricing side by side with the standard film. The same orders show how the two lines sit side by side on the shelf: virgin film as crystal-clear rolls, recycled film as its own labelled grey product — both wound folded-to-1-metre for retail racks, and both reordered month after month.
Two upgrades cover most special requirements:
What thickness should I use for a vapour barrier under a slab?
Vapour barriers sit at the upper end of the 30–200 mic range, because continuity and puncture resistance carry the job. Send us the slab detail and we will recommend a specification.
Can you produce a width that is not on your list?
Widths up to 8 m are produced to order — the range on the site is the envelope, and your required dimension plus anchoring allowance defines the quote.
Do you offer colours other than clear, black and blue?
Yes — custom colours are part of the made-to-order service. Tell us the colour and the job, and we quote it as a specification.
What is the MOQ and can I mix specifications in one container?
MOQ is 1,000 kg per specification. Different specifications can be mixed in one container against one order plan; lead time is typically 30+ days.
Is a recycled-material option available?
Yes — for buyers with sustainability requirements, construction film is available in a recycled-material version. It comes in the recyclate’s own tones — grey or greyish-white rather than the virgin line’s clear, black and blue — and is typically specified at heavier gauges than virgin film for the same job (a recent Israeli order paired 100 mic virgin rolls with 200 and 300 mic recycled rolls). Width, gauge and MOQ are confirmed per specification, with folded-to-1-metre retail winding available.
Related reading: Construction Film on Site: Vapour Barrier, Dust Sheet or Curing Cover? · PO Greenhouse Film · Request a Quote
New Materials & Chemicals
Phase 2 · Oct 23–27 · Booth 16.4D32Houseware
Agricultural film & film-based houseware — meet our export team.
Hello! Need greenhouse or mulch film specs, pricing or shipping? Ask us directly — we reply fast.
💬 Chat on WhatsApp